EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Cost Controller is a hugely economical photo voltaic controller suitable for off-grid photo voltaic devices. According to multiphase synchronous rectification know-how, it makes sure optimized energy conversion and procedure balance for an array of photovoltaic (PV) purposes.
Key Capabilities of your EPEVER Tracer AN Collection Controller
The Tracer AN sequence utilizes EPEVER Photo voltaic Cost Controller technological know-how for top-quality photo voltaic energy harvesting. Key functions contain:
Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Innovative MPPT Algorithm with >99% effectiveness.
Dual-Phase Charging for enhanced battery lifestyle.
LCD Display with genuine-time info checking.
Multiple Load Control Modes including manual and timer.
Comprehensive Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Stage-by-Step Guide to Setting Up the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Guarantee all parts are included: Tracer AN unit, temperature sensor, interaction cables, and person manual.
Confirm the model number and voltage scores match your photo voltaic panel and battery technical specs.
2. Mounting the Charge Controller
Select a well-ventilated, dry location near the battery lender.
Secure the Tracer AN controller utilizing the offered mounting brackets.
Manage right clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Usually follow good basic safety protocols and ensure the system is run off in advance of connecting elements.
Stage 1: Join the battery terminals on the charge controller (positive to beneficial, adverse to damaging).
Step two: Link the solar panel array for the PV enter terminals.
Action 3: Join the load terminals if utilizing a direct load relationship.
Action 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Power over the controller by connecting the battery 1st.
Use the Liquid crystal display Show to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, gentle Manage.
five. Monitoring and Details Logging
The Tracer AN Sequence supports genuine-time checking using the MT50 distant meter.
Knowledge can be logged by means of the RS485 conversation port using software for instance Photo voltaic Station Laptop.
Remote checking is possible While using the EPEVER WiFi module.
6. Troubleshooting Common Difficulties
Problem one: No Energy Output
Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Difficulty 2: Around-Voltage Safety
Validate the solar array’s voltage ranking.
Modify procedure parameters if needed.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT options inside the menu.
Benefits visit here of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Increased Performance: Lowered Electricity losses throughout conversion.
Increased Reliability: Steady general performance below variable masses.
Longer Battery Daily life: Dependable and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is an Excellent option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up manual, end users can be certain optimum performance and program longevity.